SHS1000

Handheld Oscilloscope – SHS1000 Series

Handheld Digital Oscilloscope

20160815131116!Siglent_Logo

Model

SHS1102

SHS1162

 

 

Category:

Description

Application

  • Embedded electronic circuit design and test
  • Mechanical and electrical products design and analysis
  • Manufacturing and circuit function test
  • Differential signal analysis
  • Floating signal measurements

Key Features

  •  Combines the functions of oscilloscope, multimeter and recorder in one
  • Isolated oscilloscope channels, isolation level: CAT II 1000V  and CAT III 600V
  • 60MHz/100MHz bandwidth, 1G sampling rate, 2M memory depth, 7M recording length
  • Built-in lithium battery
  • 5.7 inches color TFT-LCD

Specification

ModelSHS1102SHS1062
Bandwidth 100MHz 600MHz
Rise time ”≤3.5ns≤5.8ns
Real time sampling rate 1GSa/s
Equivalent sampling rate 50GSa/s
Vertical sensitivity 5mV – 100V/div
Time base range2.5ns – 50ns/div Scan:100ms – 50s/div
5ns – 50s/div
Memory depth 2Mpts
Triggering Edge, Pulse, Video, Slope, Alternative
Vertical resolution 8bit
Triggering frequency counter 6 digits
Data recorder 7M points
Trend plot 800K/CH
InterfaceUSB Device, USB Host
Math operation +, -, * , /, FFT

Multimeter Specification

Maximum resolution 6000 Counts
Item Range Accuracy
DC Voltage
60mv
60mv – 1000v
±1%±15digit
±1%±5digit
AC Voltage
60mv
600mV – 750V
±1%±15digit
±1%±5digit
DC Current
60 mA
6A – 10A
±1%±5digit
±1.5%±5digit
AC Current
60 mA
6A – 10A
±1%±5digit
±1.5%±5digit
Capacitance40nF
400nF-400μf
±3%±10digit
±4%±5digit
Resistance600Ω - 60MΩ ±1%±5digit
Continuity<50Ω Buzzer sounds
Diode0V – 2V
Trend plot 1.2M points
Measuring mode Manual/Auto

Isolation Level

Max input Voltage
 
Input by input port directly CATII 300V
Input by 10: 1 probe CATII 1000V, CAT III 600V
The Max input voltage of Multimeter DC 1000V, AC 750V
Max floating Voltage 
Float voltage between BNC reference and earth ground CATII 1000V, CAT III 600V
Float voltage between BNC reference CATII 1000V, CAT III 600V
Float voltage between multimeter reference and earth ground CATII 600V, CAT III 300V
Security: Isolated Handheld Digital Oscilloscope should be designed according to the standard of level II and pollution degree level II which apply to measure 1000V. Or according to the standard of level III and pollution degree level III which apply to measure 600V.

General Feature

Display5.7 inches color TFT-LCD, 320*234
Power supply Charging/Battery
Power mode
Lithium battery: 7.4V 5000mAh, Battery lasts >5 hours;
DC adapter, 100-240V 50/60Hz input, 9V 4A output
Net weight 1.5 Kg
Dimension 259.5mm*163.2mm*53.3mm
Accessories Two passive probes, multimeter pen, USB data cable, DC adapter, manual, CD.

Reviews

There are no reviews yet.

Be the first to review “Handheld Oscilloscope – SHS1000 Series”

Your email address will not be published. Required fields are marked *