Description

1. Training system control panel having rating of 500 VA and it used as solar training

system and also power generation as well.

02.Training system control panel  have built in DC voltmeters, DC ammeters, AC Voltmeter AC multifunction meter(for AC current, voltage, power, frequency

03.Training have control panel built in protection circuit for battery & solar panel

04.Training system control panel have built in 30A terminals for making the connection

05.Training System includes 250Wp solar panel: 2 Nos., Battery 100Ah: 2 Nos., PCU (POWER AND CHARGE CONTROLLER UNIT): 1 No. , Control panel for experiments equipped with meters, connecting terminals and switches

6. Solar Panel: 01 Nos. Pm : 100Wp,Voc : 43V, Isc : 7.75A,Vmp : 35V,Imp : 7.14

POWER AND CHARGE CONTROLLER UNIT

Inverter Capacity 300-600VA and Input Voltage 190~260V AC

Output Voltage on Mains mode is same as input

Output Voltage on UPS mode 210~245V

Output Frequency on UPS mode 50Hz ±0.1Hz

Output waveform on Mains mode is same as input

Output waveform on UPS mode Modified Sine wave

Battery Charging Current 12A

Efficiency at full load >80%

UPS overload and short circuit facility is available

control panel design based Microcontroller

MCB : C Type 16A Battery: 01 Nos.

Solar Battery of Capacity: 12V/60-100Ah.

Charge Controller Technologies: Solar PV

Module : 24– 50V,Current :25- 40A

Battery voltage : 12-24V

Technology :MPPT

Charging Stage : Bulk, Absorptions and Float

Meter specification :

DC Voltmeter : 0-300V;

DC Ammeter : 0-40A ;

Multi Function Meter : Voltage-10-230V ;

Current-100mA-5A ;

Energy meter Display Resolution-0.001kWh ;

Frequency-50Hz

Training platform used to conduct below Experiment:

Measurement and Analysis of Different

parameters of Solar PV Module : open circuit and short circuit,

parameter measurement with series and parallel PV modules ,

I-V characteristic and Power curve of PV module and PV array .,

efficiency and fill factor

Load Estimation and calculation

Study of Charge controller

Study of different parameter of inverter

efficiency , PWM switching , charging of

batteries , over load and over battery protection

STANDARD ACCESSORIES:

Main cord ,Patch cord, Operating manual

ELECTRIC SUPPLY SPECIFICATION: AC 240 V